PDA

View Full Version : Elser 2085



maragelis
08/12/2009, 00:48
Σας παρακαλώ αν έχει κάποιος τις οδηγίες για τον συναγερμό elser 2085 ας με βοηθήσει λίγο. Θέλω να ρυθμίσω την ευαισθησία.

Ευχάριστο πολύ

makis206
08/12/2009, 00:57
"Ανταλλακτικά - Βελτιώσεις - aftermarket"..:winka:

:beer:

DeusEx
08/12/2009, 13:47
Τον εχω εγω τον elser και τις οδηγιες αλλα ειμαι στην δουλεια μεχρι τις 21,00

Αν προλαβω θα στο στειλω σημερα, αλλιως αυριο ...

maragelis
08/12/2009, 13:52
Ευχάριστο παρα παρα πολύ

Έχω τρελάνει την γειτονιά περνάει 747 στα 40000 πόδια και χτυπάει το μηχανάκι.

XJR_Billy
08/12/2009, 13:54
Αρχικά δημιουργήθηκε από maragelis


Έχω τρελάνει την γειτονιά περνάει 747 στα 40000 πόδια και χτυπάει το μηχανάκι.

Συγγνώμη αλλά... δεν κρατιέμαι !!!!
:bigcry: :bigcry: :rotflmao: :bigcry: :rotflmao: :rotflmao: :rotflmao: :rotflmao:

Ζεύκας
08/12/2009, 15:08
Αρχικά δημιουργήθηκε από maragelis
Σας παρακαλώ αν έχει κάποιος τις οδηγίες για τον συναγερμό elser 2085 ας με βοηθήσει λίγο. Θέλω να ρυθμίσω την ευαισθησία.

Ευχάριστο πολύ


Ξεκίνα σταματώντας να τρίβεις κυκλικά με το δάκτυλό σου τις φίσες.

DeusEx
08/12/2009, 21:21
λοιπον τα γραφω κατευθειαν απο το manual οποτε δεν σου κανω μεταφραση στα ελληνικα!

Adjust and Test sensitivity level of the shock sensor
------------------------------------------------------------------
1.Turn the ignition switch on/off 3 times and stay in off position

2.Push the valet switch(to koumpaki katw apo thn sela tou sunagermou) 6 times and holding the 6th push until three chirps with a long chirp is hearing then release the valet switch.You are now in Alarm feature "III" programming mode.

3.Press and hold F button on the transmitter for 2 seconds. 2 LED flash, 2 siren/horn chirps to indicated the unit is ready to accept adjustments of the schock sensor.

4.Press F button on the transmitter once will decrease sensitivity level by one, each time an decrease is made the siren/horn chirp will respond with 1 chirp, while 2 chirp indicates minimum sensitivity

5.Press the (anoixto louketaki) button on the transmitter once will increase sensitivity level by one, each time an increase is made the siren/horn chirp will respond with 1 chirp, while 2 chirp indicates the maximum of sensitivity.

6.Hit the bumper or strong metal part of the motorcycle to test the threshold level of the sensor.
a)Activate the warn-away (first stage the shock sensor) the siren/horn will emit a short chirp.
b)Activate the full alarm (second stage the shock sensor) the siren/horn will emit a long chirp.

7.When you are satisfied with the setting, press the (kleisto louketaki) button once time to lock the adjustment.

Note: If 20 seconds of inactivity expire, or (kleisto louketaki) button on the transmitter is press during the above steps, the unit will exit program mode and return to the disarmed mode. A 3 long chirps to confirm exit.



εκει που λεω ανοιχτο κ κλειστο λουκετακι ειναι τα αντιστοιχα συμβολα στο χειρηστηριο σου.

αν σου φαινονται κινεζικα δεν φταιω εγω , ετσι ακριβως τα γραφει μεσα στο manual !

:lol:

maragelis
09/12/2009, 08:28
Μια χαρα thanks