PDA

View Full Version : Nitrous Oxide and Accessories



free rider
30/06/2005, 21:20
When it comes to Nitrous Oxide there are only two names you need to know: APE and NOS. For the motorcycle enthusiast who wants to be sure of optimal nitrous system yuning, the NOS 03000 series systems are the ultimate.Measured amounts of N2O and fuel are injected directly into each cylinder's intake port, lending control, perfect tuning and complete adjustability.
This becomes especially important for those of you who n eed super-high nitrous flow for all-out racing. The engine tuner can control each cylinder individually, so you can change the mixture variation merely by changing jets. Some special installation procedures may be required. APE manufactures billet nozzle manifolds for most popular applications, others will rerquire drilling and tapping intake ports for nozzle installation.


18469

free rider
30/06/2005, 21:23
APE NITROUS OXIDE MANIFOLDS


18471

free rider
30/06/2005, 21:24
Programmable Nitrous Control System

The programmable progressive nitrous control unit allows you to program the nitrous to come in in stages as the conditions (wheel spin, wheelies etc) allow. You can begin a run with a small shot or none at all and bring it up 100% anywhere you want. This allows the tuner to fine-tune the power curve of an engine to best utilize prevailing conditions.

Clearly this is the most sophisticated progressive nitrous controller availabe today. However, it is very easy to use, and each function is set through turning a series of dials to the desired position and pushing a "program" button.


18472

free rider
30/06/2005, 21:25
Showerhead Distribution Blocks

For custom plumbing of single and dual stage nitrous kits. Super-high flow. 1/8 NPT in, 1/16th NPT out. The showerhead features individual fittings for each nitrous or fuel line. Splits one line from the solenoid into four to the foggers. One each required for nitrous and gas.


18473

free rider
30/06/2005, 21:26
NOS Bottles

NOS bottles come in four sizes. All feature high-flow valve.


18474

free rider
30/06/2005, 21:27
NOS Fuel Pump

NOS uses a true vein type pump to maintain smooth pressure to the fuel-enrichment system. This pump is included in all kits.


18475

free rider
30/06/2005, 21:28
NOS Fogger2™ Nozzle

An improvement over the original Fogger, the Fogger 2 features the most advanced nitrous/fuel distribution available today. Fogger 2s are available standard, 180°, 90° left and 90° right discharge. Feature super-quick jet changes.


18476

free rider
30/06/2005, 21:28
Nitrous Purge Valve Kit

Kit



Designed to purge Nitrous vapors at the solenoids for instant and consistent nitrous injections. When you hit the button, response can be delayed due to the time it takes the liquid nitrous to reach the solenoid. This purge valve solenoid bleeds accumulated nitrous vapor from the supply lines. Includes solenoid, push button, filter and wiring.


18477

free rider
30/06/2005, 21:29
NOS Distribution Blocks

NOS distribution blocks are precision machined to help distribute balanced amounts of nitrous and fuel to each intake port. 1/8 NPT in, 1/16th NPT out. Fittings must be ordered seperately. Available in high-polish show quality, ad "C" after part number.


18478

free rider
30/06/2005, 21:31
NOS Fuel and Nitrous Guages

Guages



NOS custom guages help you keep your nitrous system in tune. For example, the best performance is gained when nitrous pressure is between 750 and 900 psi. The guage can alert you of low pressure before making a run.


18479

free rider
30/06/2005, 21:32
Fogger Nozzle Tap



This tap (included in all kits) is necessary for installing NOS Fogger nozzles in manifolds, heads etc.


18480

free rider
30/06/2005, 21:32
Fogger Nozzle Funnel Jets




NOS Fogger Nozzles use metered funnel jets to both nitrous anf fuel inlets. Tuning power is done by increasing or decreasing nozzle jet size. Each fogger takes two jets; one fule, one nitrous.
#14, 16, 18, 20, 22, 24, 26, 28


18481

free rider
30/06/2005, 21:33
Fuel and Nitrous Solenoids

Cheater™ Series
The Cheater nitrous solenoid will handle flow up to 250 HP with a 10 amp draw. The Cheater™ fuel solenoid will handle flow up to 400HP with a 1.6 amp draw




Power Shot™ Series
This nitrous solenoid will deliver flow up to 175 HP with a low current draw of only 8.6 amps, while the fuel solenoid will deliver flow up to 200 HP while drawing only .6 amps Rebuild kits and high-energy kits are available.


18482

free rider
30/06/2005, 21:34
Bottle Brackets

NOS Bottle brackets are available in two styles, steel (included in NOS kits) and billet aluminum for that hot custom look.

gmakris
30/06/2005, 22:23
Ti egine Chris? Etoimazeis tipota? :D

Tropeas
30/06/2005, 22:28
Πωπω πήρε φόρα και δεν πιανεται....:D

free rider
01/07/2005, 07:45
Αρχικά δημιουργήθηκε από gmakris
Ti egine Chris? Etoimazeis tipota? :D

Γιώργο το μόνο σίγουρο είναι οτι το μανουαλ του 02 το εχω μάθει απ έξω...
χεχεχε...

και οτι την ψάχνω με τα μηχανολογικά ...
ειναι η τρέλα μου..

ιδέες για project υπάρχουν πολλές..

το ζήτημα είναι η όρεξη , ο χρόνος , και να γίνεται ομάδική δουλειά...
:beer: :beer:

lygonis
01/07/2005, 09:27
Εγώ ψηφίζω στροβιλοσυμπιεστή είναι πιό αξιόπιστο.Πάντως μπάβο που την ψάχνεις

free rider
01/07/2005, 23:31
Αρχικά δημιουργήθηκε από lygonis
Εγώ ψηφίζω στροβιλοσυμπιεστή είναι πιό αξιόπιστο.Πάντως μπάβο που την ψάχνεις

παντως αστεία αστεία δεν θα με χάλαγε σε ενα test bike να δοκιμάσω να βάλω ή στρόβιλο ή μπουκάλα..

με τον στρόβιλο είναι σχετικά πιό απλά η προσαρμογή..

λογικά θα πρέπει να παίρνει κίνηση απο την εξάτμιση..
και να παρεμβάλεται στις εισαγωγές???

χμμμ
πως θα πουσάρει την ροή του καυσίμου...???

κάπως ετσι πρέπει να δουλεύει..

το ζήτημα θα ήταν να βρεθεί μια αξιόπιστη τουρμπίνα για να δοκιμαστεί...

sonic22
02/07/2005, 00:22
ετσι για να δωσω τρωφη για προβληματισμο...

υπαρχουν τα λεγομενα e-turbo τα οποια ειναι ουσιαστικα "ανεμιστηρες" εξαερισμου (αξωνικης-ακτηνικης ροης)

δεν δινουν τρελες πιεσεις αλλα για 12Ε που κοστιζουν κανουν πολυ και ευκολη δουλεια...


δυστηχως καπιοες φωτο που ειχα τις εκανα delete...

ψαχτω παντος...

pavlaras1
02/07/2005, 02:47
Γεια σας.

Μου αρεσε αυτο που διαβασα και ηθελα να ρωτησω αν βγαινει κατι τετοιο ή εστω παραπλησιο και για το μοντελο της Yamaha Aerox Rossi Replica ?

Αν ναι ξερει κανεις ποσο κοστιζει και απο που μπορω να το προμηθευτω και ποιος αναλαμβανει την εγκατασταση?

Αυτα προς το παρον .

Υ.Γ. Με ενδιαφερει οτι γνωριζετε απο Turbo και Nos.

:wave2: