idi
09/09/2005, 15:22
να τι εκανε ο τυπος
"You will need,the correct size spanners to remove the can (obviously),a drill,an angle grinder,some rivets and a rivet gun,and some clear silicone sealant
Step 1: Remove the can from the bike
Step 2: Drill out the rivets holding the end cap on
Step 3: Cut the desired amount off with the angle grinder,don't cut too much off at first as you can always cut off more but can't put any back on
Step 4: Place end cap back on to the end of the can,you may have to de-burr the edges of the can to get this back on
Step 5: Drill holes in the can with the end cap on so as you know where the holes need to be
Step 6: Take end cap off,smear some silicone sealent around the inside of the end cap,place back on the can and rivet it back on
Step 7: Wipe any excess silicone off of the can,put it back on the bike and enjoy the new sound"
23422
"You will need,the correct size spanners to remove the can (obviously),a drill,an angle grinder,some rivets and a rivet gun,and some clear silicone sealant
Step 1: Remove the can from the bike
Step 2: Drill out the rivets holding the end cap on
Step 3: Cut the desired amount off with the angle grinder,don't cut too much off at first as you can always cut off more but can't put any back on
Step 4: Place end cap back on to the end of the can,you may have to de-burr the edges of the can to get this back on
Step 5: Drill holes in the can with the end cap on so as you know where the holes need to be
Step 6: Take end cap off,smear some silicone sealent around the inside of the end cap,place back on the can and rivet it back on
Step 7: Wipe any excess silicone off of the can,put it back on the bike and enjoy the new sound"
23422