TOLISTOLAROS
16/02/2009, 15:24
Παιδιά επειδή υπάρχει σύγχυση σχετικά με τα clipon της LSL που θα βάλω στο SV αν μπορεί κάποιος να μεταφράσει το παρακάτω θα βοηθήσει στο να μην πάρω κάτι που δε θα ταιριάζει(γρατζουνάει τα fairing).
1ον: τα κλιπόν της σειράς Stummellenker Match
LSL-Stummellenker Match Bestehen aus einer zweiteiligen Konstruktion von gefräster Schelle und eingestecktem Aluminium Lenkerrohr. Durch das belastungsoptimierte Design der Halteschelle wird eine äußerst leichte Stummeleinheit geschaffen, die trotz ihrer hohen Steifigkeit mit dem geringen Gewicht überrascht. Die Lenkrohre sind wie unsere Alu-Lenker aus hochfestem Rohr mit 4mm Wandung hergestellt. Ein Herausrutschen des Rohres wird auch bei Lösen der Klemmung sicher verhindert, da eine der beiden Klemmschrauben als Sperre in die Aussparung des Rohres eingreift.
2ον:τα κλιπόνς της σειράς Der Rennstummel Offset High
Die Rennsportvariante Offset-High ist extrem leicht konstruiert und bietet einen Versatz von 25mm nach vorn und 37mm nach oben. Die Schelle ist silber-glänzend eloxiert; der Lenkrohrwinkel beträgt 5°. Die Lenkrohre sind identisch mit dem Sport-Match in sieben Farben wählba
3ον:τα κλιπόν της σειράς Der Klassiker Sport-Match
Extrem leichter Sportstummellenker mit dicht am Gabelrohr positioniertem Lenkrohr. Der Stummellenker besteht aus zwei Komponenten, der Stummellenkerschelle und dem Lenkerrohr. Die Schelle aus hochfestem Aluminium wird mit schlanken und außerordentlich zugfesten M6-Inbusschrauben verschraubt und ist glänzend silber-eloxiert; der Lenkrohrwinkel beträgt 5°. Die Lenkrohre sind aus vergütetem Aluminium (2214 T6) mit 4 mm Wandstärke gezogen und können in den sieben Farben silber, titan, schwarz, blau, rot, gold oder violett gewählt werden. Schellen und Lenkrohre müssen separat bestellt werden.
Αν κάποιος βαριέται τουλάχιστον να πει τί σημαίνουν τα
und bietet einen Versatz von 25mm nach vorn und 37mm nach oben. Die Schelle ist silber-glänzend eloxiert; der Lenkrohrwinkel beträgt 5°
Ευχαριστώ!
:wave2:
1ον: τα κλιπόν της σειράς Stummellenker Match
LSL-Stummellenker Match Bestehen aus einer zweiteiligen Konstruktion von gefräster Schelle und eingestecktem Aluminium Lenkerrohr. Durch das belastungsoptimierte Design der Halteschelle wird eine äußerst leichte Stummeleinheit geschaffen, die trotz ihrer hohen Steifigkeit mit dem geringen Gewicht überrascht. Die Lenkrohre sind wie unsere Alu-Lenker aus hochfestem Rohr mit 4mm Wandung hergestellt. Ein Herausrutschen des Rohres wird auch bei Lösen der Klemmung sicher verhindert, da eine der beiden Klemmschrauben als Sperre in die Aussparung des Rohres eingreift.
2ον:τα κλιπόνς της σειράς Der Rennstummel Offset High
Die Rennsportvariante Offset-High ist extrem leicht konstruiert und bietet einen Versatz von 25mm nach vorn und 37mm nach oben. Die Schelle ist silber-glänzend eloxiert; der Lenkrohrwinkel beträgt 5°. Die Lenkrohre sind identisch mit dem Sport-Match in sieben Farben wählba
3ον:τα κλιπόν της σειράς Der Klassiker Sport-Match
Extrem leichter Sportstummellenker mit dicht am Gabelrohr positioniertem Lenkrohr. Der Stummellenker besteht aus zwei Komponenten, der Stummellenkerschelle und dem Lenkerrohr. Die Schelle aus hochfestem Aluminium wird mit schlanken und außerordentlich zugfesten M6-Inbusschrauben verschraubt und ist glänzend silber-eloxiert; der Lenkrohrwinkel beträgt 5°. Die Lenkrohre sind aus vergütetem Aluminium (2214 T6) mit 4 mm Wandstärke gezogen und können in den sieben Farben silber, titan, schwarz, blau, rot, gold oder violett gewählt werden. Schellen und Lenkrohre müssen separat bestellt werden.
Αν κάποιος βαριέται τουλάχιστον να πει τί σημαίνουν τα
und bietet einen Versatz von 25mm nach vorn und 37mm nach oben. Die Schelle ist silber-glänzend eloxiert; der Lenkrohrwinkel beträgt 5°
Ευχαριστώ!
:wave2: