Swirling-hydrodip success

[spyros!]

Kαλησπερα χαζευοντας στο youtube επεσα πανω σε αυτα τα βιντεο:

http://www.youtube.com/watch?v=e8JcW1mO5Tc

Γνωριζετε την παραπανω διαδικασια,εχεις καποιος προσπαθει να κανει κατι σαν το παραπανω βιντεο?Αν ναι ποια ειναι η διαδικασια και τι περιεχει μεσα?

http://www.youtube.com/watch?v=VfTgAJwTuLU

Φαινεται πολυ ευκολο,εχεις καποιος κανει αυτη την διαδικασια?



Αν καποιος γνωριζει,με ενδιαφερει πολυ να μαθω!

[MikeG]

http://www.moto.gr/forums/showthread...light=Swirling

[spyros!]

http://www.moto.gr/forums/showthread...light=Swirling

Ευχαριστω φιλε μου,αλλα δεν εχει δοθει καποια απαντηση,που να βοηθαει!

[MikeG]

Ευχαριστω φιλε μου,αλλα δεν εχει δοθει καποια απαντηση,που να βοηθαει!

& ούτε θα δοθεί.

[spyros!]

& ούτε θα δοθεί.

Γνωριζεις εσυ κατι?

[Bradipous]

Hydrographics or HydroGraphics, also known as immersion printing, water transfer printing, water transfer imaging, cubic printing, or hydro dipping, is a method of applying printed designs to three-dimensional objects. The hydrographic process can be used on metal, plastic, glass, hard woods, and various other materials. In the process, the substrate piece to be printed is pre-treated and a base coat material is applied. A polyvinyl alcohol film is gravure-printed with the graphic image to be transferred, and is then floated on the surface of a vat of water. An activator chemical is sprayed on the film to dissolve it into a liquid and activate a bonding agent. The piece is then lowered into the vat, through the floating ink layer, which wraps around and adheres to it. After removing the piece from the water, a top coat is applied to protect the design. With multiple dippings, hydrographics printing can achieve full 360° coverage of the part surface, including small crevices.


Αυτοι εχουν και ωραια βιντεακια και απο οτι φαινεται χρησιμοποιουν διαφορετικη τεχνικη.

Και αυτοι εχουν πολλα σχεδια..

[spyros!]

Hydrographics or HydroGraphics, also known as immersion printing, water transfer printing, water transfer imaging, cubic printing, or hydro dipping, is a method of applying printed designs to three-dimensional objects. The hydrographic process can be used on metal, plastic, glass, hard woods, and various other materials. In the process, the substrate piece to be printed is pre-treated and a base coat material is applied. A polyvinyl alcohol film is gravure-printed with the graphic image to be transferred, and is then floated on the surface of a vat of water. An activator chemical is sprayed on the film to dissolve it into a liquid and activate a bonding agent. The piece is then lowered into the vat, through the floating ink layer, which wraps around and adheres to it. After removing the piece from the water, a top coat is applied to protect the design. With multiple dippings, hydrographics printing can achieve full 360° coverage of the part surface, including small crevices.


Αυτοι εχουν και ωραια βιντεακια και απο οτι φαινεται χρησιμοποιουν διαφορετικη τεχνικη.

Και αυτοι εχουν πολλα σχεδια..

Σε ευχαριστω πολυ φιλε μου!

[motomaniac]

κανενα νεο? ψαχνω υλικα. κι ειδικα το activator ειναι δυσκολο στο ελλαδισταν.